Comment by embedding-shape

Comment by embedding-shape 11 hours ago

I haven't made any calculations, and it's more a hunch, but considering you usually need to remove hundreds of KG in order to make an impact on how much fuel is being spent, 40-50L of gas (~40KG difference between full and empty maybe?) would have an marginal effect on how much fuel is spent to carry a full tank vs 10% filled tank.

Besides, with a smaller tank, you'll make more trips to tank it, and also have less choice to go to gas stations that are further away but have cheaper price. Then again it becomes a question of "Do I want more time or more money?", back to square one :)

Edit: Also, someone correct me if I'm wrong, but doesn't the fuel pump use fuel itself as a coolant or something? Never investigated myself, but some car-knower once told me that running the tank on low always isn't good for the fuel pump, or something like that. If that's true, running with 10% of the fuel would mean more maintenance too, potentially removing any savings in the first place.

jansper39 4 hours ago

> Never investigated myself, but some car-knower once told me that running the tank on low always isn't good for the fuel pump, or something like that.

The main issue is that it risks pulling detritus from the very bottom of the fuel tank, usually a bigger issue in diesels and I suspect less of a problem these days.

Reply View 1 reply

embedding-shape 2 hours ago

Aah, I have a diesel car, maybe that was what he was alluding to! Car is from 2017 so not that old. Thanks :)

Reply View | 0 replies

alias_neo 11 hours ago

> doesn't the fuel pump use fuel itself as a coolant or something

I know very little about these things, but my understanding was always that any form of liquid pump uses the liquid itself as coolant to some extent.

Reply View 2 replies

embedding-shape 11 hours ago

Yeah, fair enough, I think what he mentioned though, wasn't just about fuel going through the pump being used as coolant, but some extra process that only happens when you're not running below say 10% or whatever, an extra cooling process that only runs when you're not low on fuel. Maybe I misunderstood him though and it's just about the liquid passing through.

Reply View | 1 reply
- alias_neo 10 hours ago
  
  I think the fuel passing through is the only method that could be used to cool, the volume of fuel required is presumably constant, regardless of how much fuel you have left, so the amount passing through the pump should be the same until you run out.
  On a related note, my car has a fuel heater, to pre-heat the Diesel before it hits the engine, I assume this is typical in modern cars, but using the fuel as a coolant would presumably contribute positively to this desire for warmer fuel entering the cylinders.
  
  Reply View | 0 replies