Comment by contrarian1234
Comment by contrarian1234 16 hours ago
Why not just beam power down the optical fiber? Optical fiber is exceptionally clear and works in fog and rain
Comment by contrarian1234 16 hours ago
Why not just beam power down the optical fiber? Optical fiber is exceptionally clear and works in fog and rain
just have a tiny steam turbine equivalent...? (some thermoelectric generator) You don't really need to be efficient. You have fans to blow air and dissipate heat on the other end after all
I have no idea why this might be limited by the light source being collimated?
I mean, you can get electricity from PV illuminated by a laser, and everything I've heard so far says it's easier than with sunlight because you can match the frequency of the laser to the band gap of the PV.
Sure, you absolutely can do it. But material science quickly becomes a major limit.
For something 15% efficient like a high quality PV cell, for every 100 watts you want to be usable on the receiving side, the receiver has to bleed off 566 watts of heat. And that's 566 watts of waste heat that is highly concentrated.
Consider a single residental power circuit. 12A maximum, 120v, that's 1440 watts at delivery. For PV power delivery via laser, that PV would need to dissipate 8 kilowatts of waste heat. One a very small surface
It sounds like you're mistaking PV for a thermal system.
In a PV cell, you have a semiconductor. Semiconductors have this thing called a "band gap", which is the energy needed to get an electron from the valence band to the conduction band: https://en.wikipedia.org/wiki/Band_gap
The limits to efficiency of a solar panel is that sunlight has photons of many energy levels; the photons with energy less than the band gap do nothing, those with more, waste the excess.
A laser can have energy tuned to this band gap, at which point the PV part becomes ~99.9% efficient. (The laser part is not close to that efficiency).
I'm not talking about a thermal system, I'm talking about having to deal with the thermals of your inefficiencies. That energy that doesn't get converted to electricity is converted to heat. And you have to deal with it.
The type of laser based PV that you're taking about that's highly tuned is at maximum 27% efficient. Not 99%.
That's a 73% waste you have to manage
Fiber transmits light, not rf. To get power out of fiber optics you have to have a photovoltaic cell on the other side and there's a limit for how much those can produce with such a collaminated light source.
Using fiber optics for power is like trying to make a solar panel generate electricity from a laser beam.